Pioneer AVH-X7500BT - Manual (Page 34)

AppRadio Mode operation
This system can switch to the AppRadio
Mode, which you can display and operate the
application for iPhone on the screen.
In
AppRadio Mode, you can operate applica-
tions with finger gestures such as tapping,
dragging, scrolling or flicking on the screen of
the system.
Install the AppRadio app on your iPhone.
WARNING
Certain uses of a smartphone may not be
legal while driving in your jurisdiction, so
you must be aware of and obey any such re-
strictions.
If in doubt as to a particular function, only
perform it while the car is parked.
No feature should be used unless it is safe to
do so under the driving conditions you are
experiencing.
CAUTION
While driving, you cannot enter text on your iPod.
! Pioneer is not liable for any issues that may
arise from incorrect or flawed app-based
content.
! The content and functionality of the sup-
ported applications are the responsibility of
the App providers.
! In AppRadio Mode, functionality through
the product is limited while driving, with
available functions determined by the App
providers.
! Availability of AppRadio Mode functional-
ity is determined by the App provider, and
not determined by Pioneer.
! AppRadio Mode allows access to applica-
tions other than those listed (subject to lim-
itations while driving), but the extent to
which content can be used is determined
by the App providers.
Important
! The only port that supports AppRadio Mode
is USB input.
! When listening to music and sounds from ap-
plication simultaneously, see the following
section. Refer to Setting the App sound mixing
on page 35.
Notes
! Applications operable by switching this sys-
tem to AppRadio Mode are only those avail-
able for AppRadio Mode.
! Please check applications supported
AppRadio Mode at
http://www.pioneer.eu/AppRadioMode
iPhone compatibility
AppRadio Mode is compatible with the fol-
lowing iPod models.
! iPod touch 5th generation
! iPod touch 4th generation
! iPhone 5
! iPhone 4S
! iPhone 4
Starting procedure
1 Install the AppRadio app on your
iPhone.
2 After configuring RGB Input, connect
the iPhone to this unit.
# For iPod with lightning connector users
— Set RGB Input to iPhone (VGA adapter).
— Use the CD-IV202AV (sold separately) and
Lightning to VGA adapter (Apple Inc. pro-
ducts) (sold separately) when you use this
function.
— For more details, refer to the installation
manual.
— A Bluetooth connection is required for iPod
with lightning connector. Refer to Bluetooth
connection menu on page 65.
# For iPod with 30-pin connector users
— Set RGB Input to iPhone (CD-IU201S).
En
34
Section
09 AppRadio Mode