Pioneer AVH-X7500BT - Manual (Page 41)

! Roll – A fixed sound that repeats playback
of a certain sound.
! Turntable1 – A fixed sound that mimics DJ
scratching.
! Flanger1 – A rushing sound that mimics
that rising and falling sounds of a jet en-
gine.
! Reverb – A fixed sound effect that creates
a reverberation effect.
! Echo – A fixed sound effect that creates an
echoing effect.
Sound effects
! Cross Fade – A sound effect that creates a
fade in and fade out effect between songs.
! Flanger – A rushing sound that mimics
that rising and falling sounds of a jet en-
gine.
! Echo – A sound effect that creates an echo-
ing effect.
! Loop – A sound effect that repeats play-
back of one section of a song track.
Setting sounds and sound effects
as presets using the preset key
The Standard and Simple sound effects are
set already as default presets.
% Touch Standard or Simple to check the
settings.
The registered preset sound effect for the key
that was touched is set as a preset.
Registering sounds and sound
effects as presets
Registers a desired combination of sounds
and sound effects to
Custom.
Touch Custom to easily set the desired sound
or sound effect.
1 Touch Custom.
2 Add a check mark to the desired sound
effect by touching the option.
The marked sound effect is registered as a pre-
set in
Custom.
Notes
! If a sound effect is touched in the selection
screen for Standard or Simple, the Custom
screen is automatically displayed and the
sound effect is registered to
Custom.
! You can listen to fixed sounds to hear exam-
ples by touching the speaker icon.
En
41
Section
12
Using
MIXTRAX
Using MIXTRAX