Pioneer MEH-P9100R - Manual (Page 45)

Audio Adjustment
44
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Selecting the Equalizer Curve
You can switch between Equalizer curves.
• Rotate the EQ selector up or down to select the desired Equalizer curve.
SUPER BASS
+ = POWERFUL + = NATURAL + = VOCAL + = CUSTOM + = FLAT
Note:
• “CUSTOM” stores an equalizer curve you have made adjustments to. (Refer to “Adjusting the
Equalizer Curves” on page 47.)
• You can create different “CUSTOM” curves for different sources. (The Built-in MD player and
Multi-MD player are set to the same Equalizer Curve Adjustment setting automatically.)
Entering the Audio Menu 1
With this menu, you can adjust the sound quality.
Note:
• After entering the Audio Menu 1, if you do not perform an operation within about 30 seconds, the
Audio Menu 1 is automatically canceled.
• Audio Menu 1 functions change depending on the Rear Speaker Output setting in the Initial Setting
Menu. (Refer to “Switching the Rear Speaker Output” on page 66.)
1. Select the desired mode in the Audio Menu 1.
2. Operate a mode.
3. Cancel the Audio Menu 1.
Each press changes the Mode ...