Pioneer MEH-P9100R - Manual (Page 53)

1. Select the Subwoofer ON/OFF mode (Sub W-1) in the Audio Menu 2.
(Refer to previous section.)
Subwoofer Setting Adjustment (Sub W-2)
When the Subwoofer output is ON, you can adjust the cut-off frequency and the output
level of Subwoofer.
Note:
• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the
Subwoofer ON/OFF mode.
3. Increase or decrease the output
level with the
5/∞ buttons.
The display shows “+6” – “–6”.
2. Select the frequency to 50 Hz,
80 Hz or 125 Hz with the
2/3
buttons.
1. Select the Subwoofer setting mode (Sub W-2) in the Audio Menu 2.
(Refer to page 51.)
3. Change the phase of Subwoofer
output with the
2/3 buttons.
2. Switch the Subwoofer output
ON/OFF with the
5/∞ buttons.
52
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS