Pioneer MEH-P9100R - Manual (Page 55)

High Pass Filter (High Pass)
When you do not want sound in the Subwoofer output frequency range output from the
front or rear speakers, switch the High Pass Filter ON. Only higher frequencies than those
in the selected range are output from the front and rear speakers.
1. Select the High Pass Filter mode (High Pass) in the Audio Menu 2. (Refer to
page 51.)
Loudness Adjustment (Loudn
E
ss)
The Loudness function compensates for deficiencies in the low and high sound ranges at
low volume. You can select a desired Loudness level.
1. Select the Loudness mode (Loudn
E
ss) in the Audio Menu 2. (Refer to
page 51.)
3. Select the desired level with the
2/3 buttons.
Low
+ = Mid + = High
2. Switch the Loudness function
ON/OFF with the
5/∞ but-
tons.
3. Select the desired frequency
with the
2/3 buttons.
50
+ = 80 + = 125 (Hz)
2. Switch the High Pass Filter
function ON/OFF with the
5/∞
buttons.
54
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS