Operating the radio (am), Selecting [am] as the source 102, Screen configuration 102 – Pioneer AVIC-HD3-II User Manual

Page 102: Touch panel key operation 102, Using the av source (built-in dvd drive and radio), Selecting [am] as the source, Screen configuration, Touch panel key operation

Advertising
background image

Operating the Radio (AM)

You can listen to the radio by using the naviga-
tion system. This section describes operations
for Radio (AM).

Selecting [AM] as the source

% Touch the source icon and touch [AM].
= For details, refer to Selecting a source on
page 85

Screen configuration

1

2

3

5

6

4

1 Source icon

Shows which source has been selected.

2 Preset number indicator

Shows what preset has been selected.

3 Frequency indicator

Shows to which frequency the tuner is tuned.

4 Preset list display

Shows the preset list.

5 LOCAL indicator

Shows when local seek tuning is on.

6 LW/MW indicator

Shows whether the tuner is tuned for the LW
or MW.

Touch panel key operation

% Touch the source icon and then touch
[AM] to select the radio (AM).
When the source icon is not displayed, you
can display it by touching the screen.

Touch panel keys

1

2

3

4

1 Select a desired frequency from the list

Touch to recall the preset frequency.
p To register the frequency currently being

received to the preset list, touch and
hold the preset list.

Touch and hold: Store broadcast sta-
tions
You can register the frequency currently
being received to the preset list. You can ea-
sily store up to six broadcast frequencies
for later recall with the touch of a key.
p Touch to recall the preset frequency.

p Up to 6 stations can be stored in mem-

ory.

2 Touch: Perform manual tuning

To perform manual tuning, touch
or

briefly. The frequencies move up

or down one step.
Touch and hold: Perform seek tuning
To perform seek tuning, keep touching

or

for about one second

and release. The tuner will scan the fre-
quencies until a broadcast strong enough
for good reception is found.
p You can cancel seek tuning by touching

either

or

briefly.

p If you keep touching

or

, you can skip broadcasting fre-

quencies. Seek tuning starts as soon as
you release the keys.

p You can also perform these operations

by using

TRK (c/d) button.

3 Tune in strong signals

= For details, refer to Tuning in strong sig-
nals on page 97

4 Store the strongest broadcast frequen-

cies

= For details, refer to Storing the strongest
broadcast frequencies on the next page

Using the AV Source (Built-in DVD Drive and Radio)

Engb

102

Chapter

11

Advertising