Pioneer AVIC-HD3-II - Manual (Page 137)

= For details, refer to Using non fading output
on page 129
= For details, refer to Using subwoofer output
on page 129
Switching Auto PI seek
The navigation system can automatically
search for a different station with the same
programming, even during preset recall.
p [Auto PI] can be set only when the source
is [ OFF].
% Touch [Auto PI] in System Settings
menu.
Touching [
Auto PI] switches between [On]
and [ Off].
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When
AF or TA is on,
the tuning step automatically changes to
100 kHz. It may be preferable to set the tuning
step to 50 kHz when
AF is on.
p [FM Step] can be set only when the source
is [ OFF].
% Touch [FM Step] in System Settings
menu.
Each time you touch [
FM Step] will switch the
FM tuning step between 50 kHz and 100 kHz
while
AF or TA is on.
p The tuning step remains at 50 kHz during
manual tuning.
Selecting the TV signal
This setting is required when a Pioneer TV
tuner is connected using the AV-BUS. (This
setting is not necessary otherwise.) If the
image cannot be displayed correctly using
[
Auto], switch the setting to the TV system
(Colour system) that your TV can receive, or to
the TV system (Colour system) currently being
received.
p [TV SIG] can be set only when the source is
[ OFF].
% Touch [TV SIG] in System Settings
menu.
Each touch of [
TV SIG] changes the settings
as follows:
! Auto — Select this setting when you watch
the channel in both PAL and SECAM sys-
tem.
! PAL — Select this setting when you watch
the channel in PAL system only.
! SECAM — Select this setting when you
watch the channel in SECAM system only.
p TV tuner has no compatibility for selected
TV system (Colour system), video image is
not output correctly even though you set
the appropriate setting. For the details of
compatibility for TV system (Colour system),
refer to the
“Owner’s Manual” of the TV
tuner.
Other Functions
Selecting the video for
“Rear
display
”
You can choose either to show the same
image as the front screen or to show the se-
lected source on the
“Rear display”.
p The navigation system automatically
switches between the colour system
(NTSC, PAL, SECAM) for each video and
outputs the video on the
“Rear Display”. To
correctly output each type of video on the
“Rear Display”, we recommend using a
“Rear Display” with a function to automati-
cally switch the colour system (e.g. AVD-
W7900).
1 Press AV button to switch Audio opera-
tion screen.
Customising the Audio Setting related with Audio Visual
Engb
137
Chapter
15
Customising
the
Audio
Setting
related
with
Audio
Vi
sual