Pioneer AVIC-HD3-II - Manual (Page 130)

3 Touch [+] or [-] to adjust the output
level of the non fading.
+6 to -6 is displayed as the level is increased
or decreased.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Touch [Loudness] in Audio Settings
menu.
2 Touch [On] to turn loudness on.
To turn loudness off, touch [ Off].
3 Touch c or d to select a desired level.
Each time you touch c or d selects level in
the following order:
Low
— Mid — High
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn
HPF (high
pass filter) on. Only frequencies higher than
those in the selected range are output from
the front or rear speakers.
1 Touch [HPF] in Audio Settings menu.
2 Touch [On] to turn high pass filter on.
To turn high pass filter off, touch [ Off].
3 Touch c or d to select cut-off fre-
quency.
Each time you touch c or d selects cut-off fre-
quencies in the following order:
50
— 80 — 125 (Hz)
When Preout (the subwoofer controller set-
ting in System Settings menu) is Sub.W, HPF
function is effective for front speakers only.
If you change the acoustic field after you set it
once, the high pass filter (
HPF) setting turns Off.
Adjusting source levels
Source Level (source level adjustment) lets
you adjust the volume level of each source to
prevent radical changes in volume when
switching between sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Touch [Source Level] in Audio Settings
menu.
3 Touch [+] or [-] to adjust the source vo-
lume.
+8 to -8 is displayed as the source volume is
increased or decreased.
Sources are set to same source level adjust-
ment volume automatically.
! CD and ROM (MP3)
! EXT 1 and EXT 2
! AUX and AV INPUT
Customising the System
Settings Items
System Settings lets you perform system set
up of different settings for navigation system.
How to view and operate the
System Settings
1 Press AV button.
The Navigation screen changes to the Audio
source screen (of any source).
2 Touch [AV Settings].
The AV Settings screen appears.
Customising the Audio Setting related with Audio Visual
Engb
130
Chapter
15