Pioneer AVIC-HD3-II - Manual (Page 98)

p If the radio text data already stored under
memory 1 — 6, the radio text memorised
afterward will overwrite the existing one.
Searching for an RDS
station by PTY information
You can search for general types of broadcast-
ing programmes.
= For details, refer to PTY list on page 101
1 Touch [PTY].
2 Touch or to select a de-
sired programme type.
There are four programme types:
[
News&Inf]
— [Popular] — [Classic] —
[ Others]
3 Touch [Search] to begin the search.
The tuner searches for a station broadcasting
that programme type.
To cancel the search, touch [
Stop].
p The programme of some stations may differ
from that indicated by the transmitted PTY.
p If no station is broadcasting the type of pro-
gramme you searched for, [ Not Found] is
displayed and then the tuner returns to the
original station.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to.
TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an-
other enhanced network
’s TP station (a station
carrying information that cross-references TP
stations).
1 Tune in a TP or another enhanced net-
work ’s TP station.
When you are tuned in to a TP or another en-
hanced network
’s TP station the
indi-
cator will light.
2 Press TA/NEWS button to turn traffic
announcement standby on.
appears in the display. The tuner will
standby for traffic announcements. If you
turned the TA function on while tuned in to
neither a TP nor another enhanced network
’s
TP station, the indicator lights.
p To turn traffic announcements standby off,
press TA/NEWS button again.
p You can also turn on or off TA function by
touching [ TA] on the screen.
3 Use VOL (b/a) button to adjust the TA
volume when a traffic announcement be-
gins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA/NEWS button while a traffic
announcement is being received to cancel
the announcement.
The tuner returns to the original source but re-
mains in standby mode until turning the traffic
announcement standby off.
p You can also cancel the announcement by
pressing TRK (c/d) button or P.LIST (a/b)
button while a traffic announcement is
being received.
p The system switches back to the original
source following traffic announcement re-
ception.
p Only TP and other enhanced network’s TP
stations are tuned in during seek tuning or
BSM when TA is on.
Using the AV Source (Built-in DVD Drive and Radio)
Engb
98
Chapter
11