Pioneer AVIC-HD3-II - Manual (Page 142)

Audio screen
p Depending on the operating country of the
navigation system, some commands dis-
played in Voice Help may be unavailable.
Available commands are in white and una-
vailable commands are in grey.
When using voice operation for the
first time
Until you are familiar with this system, it is re-
commended that you stop the vehicle in a safe
place and refer to the commands displayed in
the Voice Help menu (a list of the words you
can speak). When your vehicle is parked with
the handbrake on, see the Voice Help menu
and speak voice command on that menu (ex-
cept for some cases).
Voice Help menu
VOICE icon
! When voice command is possible
! When voice command is not accepted
p When you say “Voice Help”, the navigation
system pronounces the displayed words
that can be vocalised.
p If no VOICE icon is displayed, check to see
whether the microphone is properly con-
nected and turn the power on again.
p If there are multiple pages, the voice help
menu can be switched by using or
on the screen. You can also switch
the page by saying
“Next page” or “Pre-
vious page
”.
p If you say “Back” or touch [Back], the
screen returns to the previous screen.
To cancel voice operation
You can cancel voice operation features at any
time by saying
“Cancel”. After you cancel
voice operation, the map is displayed.
p If no command is made in the next 6 sec-
onds or the recognition fails three times
successively, the voice recognition
switches to standby mode. To reactivate
voice operation, touch
VOICE icon.
Tips for Voice Operation
For your voice commands to be correctly re-
cognised and interpreted, ensure that condi-
tions are suitable for recognition.
Reduce the volume setting on your
vehicle audio system
= For details, refer to Switching the muting/at-
tenuation timing on page 134
Close the vehicle windows
Please note that wind through the vehicle win-
dow or miscellaneous noise from outside the
vehicle can interfere with voice operation.
Position the microphone carefully
For optimum pick-up, the microphone should
be fixed at a suitable distance directly in front
of the driver.
Pause before giving a command
Speaking too soon may cause the recognition
to fail.
Pronounce your commands carefully
Speak slowly, deliberately, and clearly.
Operating Your Navigation System with Voice
Engb
142
Chapter
16