05 ipod/iphone playback, Ipod/iphone playback, Ipod/iphone playback 05 – Pioneer X-SMC3-K User Manual

Page 14: Chapter 5, Confirming what ipod/iphone models are supported, Connecting your ipod/iphone

Advertising
background image

iPod/iPhone playback

05

14

En

Chapter 5:

iPod/iPhone playback

Merely by connecting your iPod/iPhone to this unit, you can
enjoy high-quality sound from your iPod/iPhone. This unit can
also be connected to a television set, letting you view images
from your iPod/iPhone.

Playback and volume level setting for iPod/iPhone music and
images can be performed from this unit or the iPod/iPhone
itself.

Confirming what iPod/iPhone models are
supported

The iPod/iPhone playable on this unit are shown below.

1

• This system has been developed and tested for the

software version of iPod/iPhone indicated on the website
of Pioneer (http://pioneer.jp/homeav/support/ios/
eu/
).

• Installing software versions other than those indicated

on the website of Pioneer to your iPod/iPhone may result
in incompatibility with this system.

1

Select “Settings” from the top menu.

When using iPod touch or iPhone, select “General” after
selecting “Settings”.

2

Select “About”.

The software version will be displayed.

Tip

• When using an iPod/iPhone not supported by this unit,

use a commercially available cable to connect the iPod/
iPhone to the AUX IN connector of this unit.

Connecting your iPod/iPhone

Caution

• When connecting iPod/iPhone units, always use the

dock adapter provided with iPod/iPhone units, or a
commercially available adapter designed to support
iPod/iPhone. The iPod/iPhone cannot be connected
without a dock adapter; attempting to connect an iPod/
iPhone without it will cause damage or malfunction.

• An iPod/iPhone universal dock adapter is not supplied

with this unit.

1

Open the iPod/iPhone connector port.

2

2

Attach the dock adapter to iPod/iPhone

connector port.

When attaching the dock adapter, be sure to orient the front-
back directions of the dock adapter correctly. To attach, first
place the protruding tabs on the front side of the adapter into
the depressions on the iPod/iPhone connector port and press
into position. When attaching the adapter, be careful not to
strike the connectors.

iPod/iPhone

Audio

Control

Video

iPod nano 2G

iPod nano 3/4/5/6G

* The iPod nano 6G cannot play back video, but can play slide

shows only.

iPod classic

iPod touch 1/2/3/4G

iPhone

iPhone 3G/3GS

iPhone 4

Note

1 • Pioneer does not guarantee that this unit plays iPod/iPhone models other than the ones specified.

• Some functions may be restricted depending on the model or software version.
• iPod/iPhone is licensed for reproduction of non-copyrighted materials or materials the user is legally permitted to reproduce.
• Features such as the equalizer cannot be controlled using this system, and we recommend switching the equalizer off before
connecting.
• Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience or loss of
recorded material resulting from iPod/iPhone failure.
• For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.

2 When opening or closing the iPod/iPhone connector port, support the top of the unit with your hand to prevent it from moving.

Push

X-SMC3_SYXZT8_En.book 14 ページ 2011年6月9日 木曜日 午後4時6分

Advertising
This manual is related to the following products: