Pioneer X-SMC3-K - Manual (Page 6)

Connections 02
6
En
Chapter 2:
Connections
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Connecting the FM antenna
Connect the FM antenna plug onto the center pin of the FM
antenna socket.
1
Connecting optional Bluetooth
®
adapter
(optional)
Connect the Bluetooth ® adapter (Pioneer Model No.
AS-BT200) to AS-BT200 terminal on the rear panel.
• Open the AS-BT200 terminal’s cover and connect the
Bluetooth
® adapter with the label side facing to the right,
then close the cover.
Connecting USB storage devices
Connecting your TV
To watch iPod/iPhone images on a television, connect it using
a composite video cable.
• When an iPod/iPhone is connected to this unit, the TV
output setting of the iPod/iPhone is automatically set to
‘ON’.
2
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
ANTENNA
LAN
(10/100)
VIDEO
OUT
DC IN
19 V
FM75
FM wire antenna (supplied)
This unit’s rear panel
Bluetooth ® adapter
(commercially available)
This unit’s
rear panel
Cover
2 • Some iPod allow the TV output setting to be changed while connected.
• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone’s TV output setting returns to its original state.
USB storage device
(commercially available)
This unit’s front panel
ANTENNA
LAN
(10/100)
VIDEO
OUT
DC IN
19 V
FM75
Yellow
TV
Video cable
(commercially available)
To video input
terminals
This unit’s rear panel
X-SMC3_SYXZT8_En.book 6 ページ ２０１１年６月９日 木曜日 午後４時６分