Pioneer X-SMC3-K - Manual (Page 20)

USB playback 07
20
En
Chapter 7:
USB playback
Playing files stored on USB storage
devices
• This unit may not recognize a USB storage device, play
files or supply power to a USB storage device. For
details, see When a USB storage device is connected on
page 35.
• Pioneer does not guarantee that any file recorded on a
USB storage device will play or that power will be
supplied to a USB storage device. Also note that Pioneer
will accept no responsibility whatsoever for loss of files
on USB storage devices caused by connection to this
unit.
1 Press FUNCTION / to select USB as the
input source.
USB is shown on the main display.
2 Connect the USB storage device.
The folders/files stored on the connected USB storage device
appear on the main display automatically.
3 Use
/ to select the file, then press
ENTER.
Playback starts.
• To return to the previous screen, press RETURN.
• Turn the power off before removing the USB storage
device.
You can perform the following operations. Note that some
buttons are not available for operation depending on the
category currently being played back.
When a USB storage device is not playing and the unit has
not been operated for 30 minutes or more, the power will
automatically turn off.
1
The following screen appears on the main display when you
play back audio files. Note that some file types may not be
displayed.
Button What it does
 PLAY Unpauses playback.
 PAUSE Pauses playback.
 STOP Stops playback.
 PREV Press to skip to the previous files.
 NEXT Press to skip to the next file.
SHUFFLE The currently selected tracks are played back in
random order (shuffle play).
REPEAT The currently selected tracks are played back
repeatedly.
*
* Press repeatedly to switch between repeat play options. ‘ ’
plays the currently playing file repeatedly. ‘ ’ plays all the files
repeatedly.
Note
1 Only when Power Save mode is selected in Auto mode select (page 28).
Song 1
Artist
Album
X-SMC3_SYXZT8_En.book 20 ページ ２０１１年６月９日 木曜日 午後４時６分