Use and care of the remote control, Before you start, Removing the front panel – Pioneer DVH-P590MP User Manual

Page 8: Attaching the front panel, Installing the battery

Advertising
background image

Removing the front panel

1

Press DETACH to release the front

panel.

2

Grab the front panel and remove.

3

Put the front panel into provided pro-

tective case for safe keeping.

Attaching the front panel

1

Slide the front panel to the left until it

clicks.
Front panel and the head unit are jointed on
the left side. Make sure that the front panel
has been jointed to the head unit.

2

Press the right side of the front panel

until it is firmly seated.

# If you can’t attach the front panel to the head
unit successfully, try again. Front panel may be
damaged if you attach the front panel forcedly.

Use and care of the remote
control

Installing the battery

Slide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus (

–) poles pointing in the proper di-

rection.
! When using for the first time, pull out the

film protruding from the tray.

WARNING

Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.

CAUTION

! Use only one CR2025 (3 V) lithium battery.
! Remove the battery if the remote control is not

used for a month or longer.

! Danger of explosion if battery is incorrectly re-

placed. Replace only with the same or equiva-
lent type.

! Do not handle the battery with metallic tools.
! Do not store the battery with metallic materi-

als.

! In the event of battery leakage, wipe the re-

mote control completely clean and install a
new battery.

! When disposing of used batteries, please

comply with governmental regulations or en-
vironmental public institutions

’ rules that

apply in your country/area.

! Always check carefully that you are loading

the battery with its plus (+) and minus (

–)

poles facing in the proper directions.

Before You Start

En

8

Section

02

Advertising