Pioneer ANH-P10MP - Manual (Page 19)

Installation
En 18
English
Espa
ñ
ol
Deutsch
Fran
ç
ais
Italiano
Nederlands
<CRD3863-A> 19
When installing the aerial inside the vehicle (on the rear shelf)
Affix the metal sheet on a surface as level as possible where the GPS aerial faces the window. Place
the GPS aerial on the metal sheet. (The GPS aerial is fastened with its magnet.)
Notes
• When attaching the metal sheet, do not cut it into small pieces.
• Some vehicle models use window glass that does not allow signals from GPS satellites to pass
through. On such models, install the GPS aerial on the outside of the vehicle.
Metal Sheet
Peel off the protective sheet
on the rear.
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
Make sure the surface is
free of moisture, dust,
grime, oil, etc., before
affixing the metal sheet.
GPS aerial
Note
The metal sheet contains
a strong adhesive which may
leave a mark on the surface
if it is removed.
CRD3863A_inst_002-029_UK 4/9/04 2:05 PM Page 19