Pioneer ANH-P10MP - Manual (Page 8)

Connecting the Units
• When disconneting a connector, pull the
connector itself. Do not pull the lead, as you
may pull it out of the connector.
• If this unit is installed in a vehicle that does
not have an ACC (accessory) position on the
ignition switch, the red lead of the unit should
be connected to a terminal coupled with igni-
tion switch ON/OFF operations. If this is not
done, the vehicle battery may be drained
when you are away from the vehicle for sev-
eral hours.
• The black lead is earth. Please earth this lead
separately from the earth of high-current
products such as power amps.
Do not earth more than one product together
with the earth from another product. For
example, you must separately earth any
amplifier unit away from the earth of this unit.
Connecting earths together can cause a fire
and/or damage the products if their earths
became detached.
Note
Cords for this product and those for other
products may be different colours even if
they have the same function. When connect-
ing this product to another product, refer to
the supplied manuals of both products and
connect cords that have the same function.
No ACC position ACC position
En 7
<CRD3863-A> 8
CRD3863A_inst_002-029_UK 4/9/04 2:05 PM Page 8