Pioneer SEP-C1 - Manual (Page 18)

18
En
ABOUT THE DRIVER PROGRAM
7 Follow the instructions that appear on the screen.
• If the [
Windows Security] screen appears during
installation, click on [ Install this driver software anyway]
to continue the installation process.
<For Windows XP>
• If the [
Hardware Installation] screen appears during
installation, click on [ Continue Anyway] to continue the
installation process.
<For Windows 2000>
• If the [
Digital Signature Not Found] screen appears during
installation, click on the [ Yes] button to continue the
installation process.
8 When installation is completed, the [Installation is now
complete.] message will appear. Click on the [Finish] button
to complete the process.
 Connecting this unit to the computer
1
Connect the USB auxiliary power cable to this unit and the
computer.
2 Connect the USB cable to this unit and the computer.
When first connecting this unit to the computer, and when
disconnecting and reconnecting the computer USB port, the
computer may display the message [
Installing device driver
software]. In this case, wait until the computer displays the
message [
Your devices are ready to use].
<For Windows XP>
• During the installation process, if the computer displays the
message [ Can Windows connect to Windows Update to
search for software?] select [No, not this time], then click
on the [
Next] button to continue the installation process.
• During installation, if the computer displays the message
[ What do you want the wizard to do?] select [Install the
software automatically (Recommended)], then click on
the [
Next] button to continue the installation process.
• If the [ Hardware Installation] screen appears during
installation, click on [ Continue Anyway] to continue the
installation process.
SEP-C1_EN.book 18 ページ ２００８年３月２４日 月曜日 午前１０時５２分