Connecting your tv and playback components, Connecting using hdmi, Connecting your equipment 02 – Pioneer VSX-2020-K User Manual
Page 15
Connecting your equipment
02
15
En
Connecting your TV and playback components
Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray disc player (BD), etc.), you can connect it to
this receiver using a commercially available HDMI cable.
If the TV and playback components support the
Control with HDMI feature, the convenient Control with HDMI
functions can be used (see Control with HDMI function on Operating Instructions in CD-ROM).
• When connecting to an HDMI/DVI-compatible
monitor using the
HDMI OUT 2 terminal, switch the
HDMI output setting to
HDMI OUT 2 or HDMI OUT
ALL. See Switching the HDMI output on Operating
Instructions in CD-ROM.
• For input components, connections other than HDMI
connections are also possible (see Connecting your
DVD player with no HDMI output on page 16).
• If you want to listen to the sound of the TV over the
receiver, connect the receiver and TV with audio
cables.
1
RS-232C
HDMI
SPEAKERS
ASSIGNABLE
COAXIAL
ASSIGNABLE
COMPONENT VIDEO
ASSIGNABLE
OPTICAL
ASSIGN
MONITOR
OUT
IN
Y
P
R
Y
CD-R/TAPE
ANTENNA
FM UNBAL 75
AM LOOP
IN
CD
VIDEO
MONITOR
AUDIO
IN
OUT
OUT
ZONE2
OUT
ZONE3
OUT
DVD
IN
TV/SAT
IN
VIDEO
IN
DVR/BDR
OUT
IN
P
B
P
R
P
B
1
IN
BD
IN
1
IN
2
IN
3
OUT 1
(CONTROL)
OUT 2
A
R
L
R
L
R
SURROUND BA
SURROUND
CENTER
FRONT
1
4
(DVD)
IN
1
(DVD)
IN
1
(TV/SAT)
IN
2
(DVR/BDR)
FRONT
CENTER
SURROUND
IN
2
(CD)
IN
2
(DVR/BDR)
CONTROL
EXTENSION
IR
12 V TRIGGER
IN
IN
IN
OUT
OUT
1
2
1
2
(OUTPUT 12 V
TOTAL 150 mA MAX)
SUBWOOFER
IN
4
LAN (10/100)
(OUTPUT
5 V
150 mA
MAX)
DIGITAL OUT
COAXIAL
OPTICAL
ANALOG
R
L
AUDIO OUT
HDMI IN
HDMI OUT
HDMI OUT
Other HDMI/DVI-
equipped component
HDMI/DVI-compatible
Blu-ray disc player
HDMI/DVI-compatible
monitor
Select one
This connection is
required in order to
listen to the sound of
the TV over the
receiver.
1
Note
1 When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI Audio Return Channel function, the sound of the
TV is input to the receiver via the HDMI terminal, so there is no need to connect an audio cable. In this case, set
TV Audio at HDMI Setup to
via HDMI (see HDMI Setup on Operating Instructions in CD-ROM).
VSX-LX53_QuickGuide_SVYXJ_ENFRDE.book Page 15 Tuesday, February 23, 2010 8:22 PM