Pioneer VSX-2020-K - Manual (Page 7)

Before you start 01
7
En
The remote has been conveniently color-coded according
to component control using the following system:
• White – Receiver control, TV Control
• Blue – Other controls (see the Operating Instructions
in CD-ROM for detail)
1  RECEIVER
This switches between standby and on for this receiver.
2 MULTI OPERATION – Use to perform multi
operations.
R.SETUP – Use to input the preset code when making
remote control settings and to set the remote control
mode.
3 Input function buttons
Press to select control of other components.
Use INPUT SELECT to select the input function.
4 TV CTRL
Set preset code of your TV’s manufacturer when
controlling TV.
5 TV CONTROL buttons
These buttons are dedicated to control the TV assigned to
TV CTRL button.
6 Receiver setting buttons
Press first to access:
AUDIO PARAMETER – Use to access the Audio
options.
VIDEO PARAMETER – Use to access the Video
options.
HOME MENU – Use to access the Home Menu.
RETURN – Press to confirm and exit the current
menu screen.
7
////ENTER
Use the arrow buttons when setting up your surround
sound system and the Audio or Video options.
8 Receiver Control buttons
Press first to access:
AUTO/ALC/DIRECT – Switches between Auto
Surround (page 25), Auto Level Control mode and
Stream Direct mode.
STEREO – Switches between stereo playback and
Front Stage Surround Advance modes.
STANDARD – Press for Standard decoding and to
switch various modes (
2 Pro Logic, Neo:6, etc.)
(page 25).
ADV SURR – Use to switch between the various
surround modes (page 26).
THX – Press to select a Home THX listening mode
(page 25).
PHASE CTRL – Press to switch on/off Phase Control.
STATUS – Press to check selected receiver settings.
PQLS – Press to select PQLS setting.
HDMI OUT – Switch the HDMI output terminal.
SIGNAL SEL – Use to select an input signal.
MCACC – Press to switch between MCACC presets.
SLEEP – Use to put the receiver in sleep mode and
select the amount of time before sleep.
CH LEVEL – Press repeatedly to select a channel,
then use
/ to adjust the level.
A.ATT – Attenuates (lowers) the level of an analog
input signal to prevent distortion.
DIMMER – Dims or brightens the display.
9 MULTI-ZONE select buttons
Switch to perform operations in the ZONE 2 and ZONE 3.
10 Remote control LED
Lights when a command is sent from the remote control.
11
Switches the remote to control the receiver (used to
select the white commands).
Switch to perform operations in the main zone.
Also use this button to set up surround sound.
12 MASTER VOLUME +/–
Use to set the listening volume.
13 MUTE
Mutes the sound or restores the sound if it has been
muted (adjusting the volume also restores the sound).
14
Press to turn on/off the illumination for the buttons. The
way the buttons light can be selected from four modes
(see the Operating Instructions in CD-ROM for detail).
RECEIVER
RECEIVER
RECEIVER
VSX-LX53_QuickGuide_SVYXJ_ENFRDE.book Page 7 Tuesday, February 23, 2010 8:22 PM