Pioneer VSX-820-K - Manual (Page 18)

Connecting your equipment 03
18
En
Connecting the speakers
The receiver will work with just two stereo
speakers (the front speakers in the diagram)
but using at least three speakers is
recommended, and a complete setup is best
for surround sound.
Make sure you connect the speaker on the
right to the right (
R) terminal and the speaker
on the left to the left ( L) terminal. Also make
sure the positive and negative ( +/–) terminals
on the receiver match those on the speakers.
You can use the speakers connected to the B
speaker terminals to listen to stereo playback
in another room. See Switching the speaker
system on page 20 for the listening options
with this setup.
You can use speakers with a normal
impedance between 6
Ω and 16 Ω.
However, note that only the front speakers are
set to a value between 12
Ω and 16 Ω if you
select SP AB in Switching the speaker system
on page 20.
Be sure to complete all connections before
connecting this unit to the AC power source.
AC IN SURR BACK /
FRONT
HEIGHT
L
(Single)
R
R
L
IN
R
L
IN
IN
OUT
IN
CD
TV/SAT DVD BD
DVR/VCR
MONITOR OUT
P R P B Y
R L
DVD IN BD IN
OUT
MONITOR
COMPONENT VIDEO
TV/SAT
IN
DVR/VCR
OUT IN
FRONT
R L
CD-R/TAPE
DVR/VCR CD-R/TAPE
PRE OUT
E
E
AUDIO
ADAPTER PORT
VIDEO
(OUTPUT 5 V 100 mA MAX)
(BD)
IN 1
(DVD)
IN 2
ASSIGNABLE
SPEAKERS
1
B
SPEAKERS A
2
ANTENNA
FM
UNBAL
75
AM
LOOP
VOLTAGE SELECTOR
110-127 V 220-240 V
SUBWOOFER
PRE OUT
CENTER SURROUND R L
SW
L
C
R SL SR
L R
Center speaker
Surround speakers Front speakers
Powered subwoofer
Speaker system B
VSX-820_SYXCN_En.book 18 ページ ２０１０年４月１２日 月曜日 午後６時５２分