Connecting to an av receiver, Connecting up 02, Connecting the multichannel analog outputs – Pioneer DV-696AV-S User Manual

Page 14

Advertising
background image

Connecting up

02

14

En

Switching the video output to interlace
using the front panel controls

Switch the player to standby then, using the
front panel controls, press

STANDBY/ON

while pressing

to switch the player back to

Interlace

.

• If the player is connected using HDMI,

disconnect the HDMI cable before
resetting the player to interlace output. (If
left connected, the HDMI output resolution
will be reset to its default—see

Resetting

the output resolution to the default setting
with HDMI connection

on page 17.)

Connecting to an AV receiver

You can connect this player to your AV receiver
using the multichannel analog outputs or one
of the digital outputs.

In addition to these connections, you should
also connect the 2 channel analog outputs for
compatibility with all discs.

You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).

1

Connect the analog AUDIO OUT 5.1ch L/

R and VIDEO OUTPUT jacks on this player to
a set of analog audio and video inputs on
your AV receiver.

2

Connect the AV receiver’s video output

to a video input on your TV.

The diagram shows standard video connec-
tions, but you can alternatively use the S-Video
or component video connections if they’re avail-
able.

You can use the SCART AV connector, or the S-
video or component video jacks to connect to
the AV receiver if you prefer.

Tip

• You usually have to connect the same kind

of video cable between your DVD player
and AV receiver, and between your AV
receiver and TV.

Connecting the multichannel analog
outputs

If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this player
to it using the multichannel analog outputs.
Doing this will ensure that you can enjoy all
kinds of disc, including Dolby Digital and DTS
DVD-Video discs, as well as high sampling rate
and multichannel DVD-Audio and SACD discs.

STANDBY/ON

S-VIDEO OUT

AUDIO OUT (5.1ch)

COMPONENT VIDEO OUT

VIDEO OUT

P

R

P

B

Y

L

R

HDMI OUT

C

SW

S

L

S

R

AV receiver

AUDIO/

VIDEO IN

DV696AV_WV_EN.book 14 ページ 2006年4月7日 金曜日 午後9時47分

Advertising