Additional information 08, Hdmi troubleshooting – Pioneer DV-696AV-S User Manual

Page 58

Advertising
background image

Additional information

08

58

En

HDMI troubleshooting

Problem

Remedy

No HDMI audio output.

• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, unreliable signal transfers may result.
• If the front panel HDMI indicator is lit:
– You won’t hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
– It is not possible to output SACD sources from the HDMI connection
of this player.
• If the front panel HDMI indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible.

No HDMI video output.

• Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
• It is not possible to output SACD source from the HDMI connection
of this player.
• Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable
signal transfers.
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See

HDMI Resolution

on page 40 to change the HDMI resolution. See

Resetting the output

resolution to the default setting with HDMI connection

on page 17 if

you want to reset the output resolution.

No multichannel HDMI
audio.

• Make sure the

HDMI Out

setting is set to

Auto

or

LPCM (5.1 ch)

(see

HDMI Out

on page 39 to do this). See also

About the HDMI

output settings

on page 47 and

HDMI output with DVD-Audio sources

on page 48.

DV696AV_WV_EN.book 58 ページ 2006年4月7日 金曜日 午後9時47分

Advertising