Using the remote control 11, Function button and audio, Button – Pioneer DEH-P88RS-II User Manual

Page 11: Before you start, Using the remote control, Function button and audio button

Advertising
background image

! When disposing of used batteries, comply

with governmental regulations or environmen-
tal public institutions

’ rules that apply in your

country/area.

Using the remote control

Point the remote control in the direction of the
front panel to operate.
! The remote control may not function prop-

erly in direct sunlight.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the
brake or accelerator pedal.

FUNCTION button and AUDIO button

You can also select the desired mode by
FUNCTION button and AUDIO button on the
remote control. But operation of

FUNCTION

button and

AUDIO button on the remote con-

trol differs from the operation of
MULTI-CONTROL on the head unit. When op-
erating the remote control, switch through the
modes as described below to select the mode.

FUNCTION button operation

% Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press

FUNCTION repeatedly to switch be-

tween the following modes:
Play mode (repeat play)

—Random mode

(random play)

—Scan mode (scan play)—

Pause (pause)

—Search mode (search meth-

od)

—TitleInput "A" (disc title input)

Note

Refer to Introduction of advanced built-in CD
player operation on page 27.

AUDIO button operation

% Press AUDIO to select the desired
mode.
Press

AUDIO repeatedly to switch between

the following modes:

F/B (balance adjustment)

—POSI (position se-

lector)

—TA1 (time alignment setting)—TA2

(time alignment adjusting)

—LOUD (loudness)

—EQ 1 (graphic equalizer)—EQ 2 (16-band
graphic equalizer)

—SW 1 (subwoofer on/off)

—SW 2 (subwoofer cut-off frequency)—SW 3
(subwoofer slope)

—F.HPF 1 (front high pass

filter slope)

—F.HPF 2 (front high pass filter

cut-off frequency)

—R.HPF 1 (rear high pass fil-

ter slope)

—R.HPF 2 (rear high pass filter cut-

off frequency)

—BBE (BBE)—BMX (BMX and

compression)

—A.EQ (auto-equalizer on/off)—

ASL (automatic sound levelizer)

—SLA (source

level adjustment)

Note

Refer to Introduction of audio adjustments on
page 55.

Before You Start

En

11

English

Section

01

Advertising