Initial settings adjusting initial settings, Selecting the display language, Setting the clock – Pioneer DEH-P88RS-II User Manual
Page 70: Initial settings, Adjusting initial settings
Adjusting initial settings
1
1
1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1
Press SOURCE and hold until the unit
turns off.
2
Press MULTI-CONTROL and hold until
Language select appears in the display.
3
Turn MULTI-CONTROL to select one of
the initial settings.
Turn
MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)
—Clock
(clock)
—Off Clock (off clock)—FM step (FM
tuning step)
—Auto PI seek (auto PI seek)—
Warning tone (warning tone)
—
Face auto open (face auto open)
—AUX1
(auxiliary input 1)
—AUX2 (auxiliary input 2)—
Dimmer (dimmer)
—Brightness (brightness)
—Digital ATT (digital attenuator)—
Audio Reset (audio reset)
—Mute (sound
muting/attenuation)
—Internal AMP (power
amp setting)
—Demonstration (feature demo)
—Reverse mode (reverse mode)—Ever-scroll
(ever scroll)
Use the following instructions to operate each
particular setting.
# You can also switch between the functions in
reverse order by turning
MULTI-CONTROL coun-
terclockwise.
# To cancel initial settings, press BAND.
Selecting the display language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1
Use MULTI-CONTROL to select
Language select.
Language select appears in the display.
2
Press MULTI-CONTROL to select the lan-
guage.
Each press of
MULTI-CONTROL selects lan-
guages in the following order:
English
—Français—Italiano—Español—
Deutsch
—Nederlands—РУССКИЙ
Setting the clock
Use these instructions to set the clock.
1
Use MULTI-CONTROL to select Clock.
Clock appears in the display.
2
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing
MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour
—Minute
As you select segments of the clock display,
the selected segment blinks.
Initial Settings
En
70
Section
13