Other functions using the aux source, About aux1 and aux2 75, Selecting aux as the source 75 – Pioneer DEH-P88RS-II User Manual

Page 75: Setting the aux title 75, Using the aux source, Other functions

Advertising
background image

Using the AUX source

Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to

AUX1 or AUX2. The relation-

ship between

AUX1 and AUX2 sources is ex-

plained below.

About AUX1 and AUX2

There are two methods to connect auxiliary de-
vices to this unit.

AUX1 source:

When connecting auxiliary equipment using a
stereo mini plug cable

% Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1.

AUX2 source:

When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)

% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner

’s manual.

This auxiliary device is automatically set to
AUX2.

# You can only make this type of connection if
the auxiliary device has RCA outputs.

Selecting AUX as the source

% Press SOURCE to select AUX as the
source.
Press

SOURCE until AUX appears in the dis-

play.

# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 72.

Setting the AUX title

The title displayed for the

AUX1 or AUX2

source can be changed.

1

After you have selected AUX as the

source, use MULTI-CONTROL and select
FUNCTION to display TitleInput "A".

2

Press DISPLAY to select the desired

character type.
Press

DISPLAY repeatedly to switch between

the following character types:
Alphabet (upper case), numbers and symbols
—Alphabet (lower case)—European letters,
such as those with accents (e.g.

б, а, д, з)

Numbers and symbols

3

Push MULTI-CONTROL up or down to

select a letter of the alphabet.
Each time

MULTI-CONTROL is pushed up, al-

phabet, numbers or symbols are displayed in
ascending order (

A B C ...). Each time

MULTI-CONTROL is pushed down, letters are
displayed in descending order.

Other Functions

En

75

English

Section

14

Advertising