Pioneer AVIC-F9220BT - Manual (Page 139)

This setting controls the guidance volume
of navigation.
p When set to
, guidance is output.
When set to , no guidance is output.
! Phone Ringtone
This setting controls the incoming ring tone
volume.
! Phone Voice
This setting controls the incoming voice vo-
lume.
p “Phone Ringtone” and “Phone Voice” ad-
justments are related to the mobile phone
featuring Bluetooth technology. No adjust-
ment is needed when the mobile phone fea-
turing Bluetooth technology is not
connected.
p Volume of the AV source is adjusted by the
VOL (+/ –) button.
= For details, refer to Checking part names
and functions on page 11.
# Touch the key next to “Beep”.
Each time you touch the key changes that set-
ting.
! On (default):
A beep sounds.
! Off:
The beep sound is muted.
# Touch the key next to “VR Beep”.
Each time you touch the key changes that set-
ting.
! On (default):
Voice recognition beep is enabled.
! Off:
Voice recognition beep is disabled.
p This function is available for AVIC-F20BT
only.
4 To finish the setting, touch [OK].
Changing the preinstalled
splash screen
You can change the splash screen to the other
images preinstalled in the navigation system.
1 Display the “System Settings” screen.
= For details, refer to Displaying the “System
Settings
” screen on page 136.
2 Touch [Splash Screen].
The
“Select Splash Screen” screen appears.
3 Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
4 Touch [OK].
The image is set as the splash screen, and the
“System Settings” screen returns.
Changing to the splash screen
stored in the SD memory card
You can change the splash screen that ap-
pears when the navigation system starts. Copy
your chosen image to the SD memory card,
and select the image to import.
p Splash screen images should be used with-
in the following formats;
— BMP or JPEG files
— Allowable horizontal and vertical size
are 2 592 pixels x 1 944 pixels or smaller
— Allowable data size is 6 MB or smaller
p Proper compatibility with allowable files is
not guaranteed.
p Imported original images will be stored in
the built-in memory, but the ability to save
these images cannot be guaranteed com-
pletely. If your original image data is de-
leted, insert the SD memory card again
and re-import the original image.
p The maximum number of images, includ-
ing the images in the built-in memory, that
can be imported and displayed on the list is
200.
1 Create a folder named
“Pictures” on the
top-most directory of the SD memory card
and store the picture files in this folder.
2 Store the picture files in the “Pictures”
folder.
Engb
139
Chapter
27
Customising
pr
eferences
Customising preferences