Pioneer AVIC-F9220BT - Manual (Page 49)

You can check real-time traffic information
transmitted by the Traffic Message Channel
(TMC) of the FM Radio Data System (RDS) on
the screen. Such traffic information is updated
periodically. When the navigation system re-
ceives updated traffic information, the naviga-
tion system will overlay the traffic information
on your map and also display detailed text in-
formation when available. When you are tra-
velling along a route and there is traffic
information on your current route, the system
will detect it and ask you if you would like to
be rerouted, or suggest another route automa-
tically.
p The system acquires the traffic information
up to 150 km in radius from the vehicle po-
sition. (If there is a lot of traffic information
around your vehicle, the radius will be
shorter than 150 km.)
p The navigation system provides the follow-
ing functions by using the information
from RDS-TMC service:
! Displaying a list of traffic information
! Displaying traffic information on a map
! Suggesting a route to avoid traffic jams
by using traffic information
p The term “traffic jam” in this section indi-
cates the following types of traffic informa-
tion: slow, queuing and stationary traffic
and closed/blocked roads. This information
is always taken into consideration when
checking your route, and the information
related with these events cannot be turned
off. If you select other traffic information in
“Traffic Settings”, the information can be
displayed in a list or on a map.
= For details, refer to Selecting traffic infor-
mation to display on page 52.
Checking all traffic
information
All traffic information on the current route is
displayed on screen in a list.
1 Display the “Destination Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 20.
2 Touch [Traffic].
The
“Traffic Menu” screen appears.
3 Touch [Traffic List].
The
“Traffic List” screen appears.
The list with received traffic information is
shown.
4 Select an incident you want to view in
detail.
The details of the selected incident are dis-
played.
p Touching an incident you want to see allows
you to view the detailed information of the
incident. If the information cannot be dis-
played on one screen, touch
or to view
the remaining information.
p Touching
allows you to check the loca-
tion on a map. (Traffic information without
positional information cannot be checked
on a map.)
# Touch [Sort].
You can sort the traffic information.
Each time you touch the key changes that set-
ting.
! :
You can sort the traffic information by dis-
tance from your current position.
For the list displayed when you touch [
Traf-
fic List], the list will be sorted according to
the linear distance from the vehicle position
to the traffic information.
For the list displayed when you touch [
Traf-
fic on Route], the list will be sorted accord-
ing to the distance from the vehicle position
to the traffic information.
! :
You can sort the traffic information in alpha-
betical order.
! :
You can sort the traffic information accord-
ing to the incident.
Engb
49
Chapter
10
Using
traff
ic
information
Using traffic information