Basics of voice operation, Flow of voice operation 153, Starting voice operation 153 – Pioneer AVIC-F9220BT User Manual

Page 153: Operating your navigation system with voice

Advertising
background image

p This function is available for AVIC-F20BT

only.

To ensure safe driving

CAUTION

For your safety, avoid viewing the screen in the
voice operation as much as possible while driv-
ing.

Voice operation is available when

“Voice Lan-

guage

” is set to one of the following lan-

guages:

! UK English/UK English :TTS
! Español/Español :TTS
! Deutsch/Deutsch :TTS
! Français/Français :TTS
! Italiano/Italiano :TTS
! Nederlands/Nederlands :TTS
= For details, refer to Selecting the language

on page 136.

Basics of Voice Operation

Your Pioneer navigation system uses the latest
in voice recognition technology. You can use
voice commands to operate many of its func-
tions. This chapter describes where you can
use voice commands, and also what com-
mands the system accepts.
You can use voice commands to operate the
following functions:

! Searching for a location by address
! Setting the route to the selected POI
! Hands-free phoning
! Switching the AV source

Flow of voice operation

You can start voice operation any time even
when the map screen is displayed or AV is op-
erating. (Some operations are not available.)

The basic steps of voice operations are as fol-
lows.

1 Switch the screen to map screen or AV op-

eration screen.

j

2 Press the

button to activate voice op-

erations.

j

3 Speak a command into the microphone

after the beep.
When the command is recognised, the na-
vigation system displays next options on
the screen, and pronounces it in some
cases.

j

4 Repeat previous step as necessary.

j

5 The requested operation will be carried out.

p The voice operation may not be operable for a

minute after the navigation system has booted
up.

p Voice operation will be activated 30 seconds

after the map screen is displayed.
If the

button does not respond, display

the disclaimer screen and then touch [

OK].

The map screen is displayed.

Starting voice operation

% Press the

button when the map

screen or the AV operation screen is dis-
played.
The voice operation screen appears.

Engb

153

Chapter

28

Operating

Y

our

Navigation

System

with

V

oice

Operating Your Navigation System with Voice

Advertising