Pioneer AVIC-F9220BT - Manual (Page 146)

Switching the muting/
attenuation timing
You can mute the AV source volume or attenu-
ate the output signal. This setting is invalid for
the mute signal that has been received from
the MUTE lead connected to the navigation
unit. (Even if this setting is
“Off”, the naviga-
tion system will mute or attenuate the audio
source volume when the signal is output via
MUTE lead.)
1 Display the
“AV System Settings”
screen.
= For details, refer to Displaying the “AV Sys-
tem Settings
” screen on page 144.
2 Touch [Mute].
Each touch of [ Mute] changes the settings as
follows:
AVIC-F20BT
! Guide/Tel/VR: The volume is muted or atte-
nuated according to the following condi-
tions.
— When the navigation outputs the gui-
dance voice.
— When you use a mobile phone via Blue-
tooth technology (dialling, talking, in-
coming call).
— When the voice recognition mode is ac-
tivated.
! Tel/VR: The volume is muted or attenuated
according to the following conditions.
— When you use a mobile phone via Blue-
tooth technology (dialling, talking, in-
coming call).
— When the voice recognition mode is ac-
tivated.
! Off: The volume does not change.
AVIC-F920BT, AVIC-F9210BT, AVIC-F9220BT
! Guide/Tel: The volume is muted or attenu-
ated according to the following conditions.
— When the navigation outputs the gui-
dance voice.
— When you use a mobile phone via Blue-
tooth technology (dialling, talking, in-
coming call).
! Tel: The volume is muted or attenuated
when you use a mobile phone via Bluetooth
technology (dialling, talking, incoming call).
! Off: The volume does not change.
p AV source volume returns to normal when
the corresponding action is ended.
Switching the muting/
attenuation level
You can select the muting/attenuation level of
“Mute”. This setting is also effective for a
mute signal that has been received from the
MUTE lead connected to the navigation unit.
p This menu is not available when AV source
is
“Off”.
1 Display the
“AV System Settings”
screen.
= For details, refer to Displaying the “AV Sys-
tem Settings
” screen on page 144.
2 Touch [Mute Level].
Each touch of [ Mute Level] changes the set-
tings as follows:
! 20dB: The volume becomes 1/10.
! 10dB: The volume becomes 1/3.
! All: The volume becomes 0.
p When you select “All”, no audio adjust-
ments are possible during the sound is
turned off.
p When you select “20dB” or “10dB”, no
audio adjustments are possible during the
sound is attenuated.
p AV source volume returns to normal when
the corresponding action is ended.
p Even when a mute signal has been received
from MUTE lead connected to the naviga-
tion unit, navigation voice guidance cannot
be attenuated or muted.
Switching Auto PI seek
The navigation system can automatically
search for a different station with the same
programming, even during preset recall.
Engb
146
Chapter
27 Customising preferences