Pioneer AVIC-F9220BT - Manual (Page 52)

For the subsequent operations, refer to Check-
ing for traffic jams automatically.
= For details, refer to Checking for traffic jams
automatically on the previous page.
# Touch [List].
The
“Traffic on Route” screen appears.
# Touch .
The message disappears, and the map screen re-
turns.
Selecting traffic
information to display
There are different types of traffic information
that can be received via the RDS-TMC service,
and you can select which types will be incor-
porated and displayed on your navigation sys-
tem.
1 Display the
“Destination Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 20.
2 Touch [Traffic].
The
“Traffic Menu” screen appears.
3 Touch [Traffic Settings].
The
“Traffic Settings” screen appears.
4 Touch [Displayed Traffic Info].
The
“Traffic Type Settings” screen appears.
5 Touch the traffic information item to
display.
A tick mark appears next to the selected traffic
information.
# Touch [All] or [None].
Selects or deselects all entries.
6 Touch [OK].
The selected traffic information icon is added
to the screen.
7 Touch [OK].
Selecting preferred RDS-TMC
service provider manually
A default preferred TMC service provider for
each country has been set. The navigation sys-
tem tunes to the radio station with good recep-
tion among the preferred RDS-TMC service
providers. If you want to set another preferred
RDS-TMC service provider, you can manually
select one from available RDS-TMC service
providers.
1 Display the
“Destination Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 20.
2 Touch [Traffic].
The
“Traffic Menu” screen appears.
3 Touch [TMC Provider Selection].
4 Touch the desired service provider on
the list.
After touching a service provider, the system
starts tuning to the selected RDS-TMC service
provider. When the tuning is successful, the
system returns to the map display.
Engb
52
Chapter
10 Using traffic information