Toshiba Qosmio F20 (PQF22) - Manual (Page 148)

8-14 User’s Manual
Using the Remote Controller, Front operation button and QosmioPlayer
12. Select [Burn to Disc] check box on the output destination setting screen
and click the [Right arrow] button.
13. The configured output device appears. Check the settings and click the
[Right arrow] button.
14. Select [DVD (1 hour)] or [DVD (2 hours)] for the Format (Quality)
selection.
15. Click the [Start] button.
Burning of video to the DVD begins.
16. The disc tray of the drive automatically opens once writing is complete.
Click the [OK] button.
Importing videos as video data in the computer, editing
them separately and saving on separate DVDs
1. Check that the external device is connected to the computer.
2. Activate WinDVD Creator 2 Platinum.
[Start] -> [All Programs] -> [InterVideo WinDVD Creator] ->
Click [InterVideo WinDVD Creator] to activate.
3. Click the [Create CD/DVD with existing video file] button.
4. Use the following steps to select the video file to be used.
(1) Specify the location to save the file.
(2) Select the file.
To select multiple files, hold down [Ctrl] key and click on the desired
files.
5. Click the [open] button.
Video files are imported and the Storyboard appears.
6. Use the following method to split video files into suitable sizes for
saving to DVDs and save them temporarily in a file.
7. While playing back the video file in the Storyboard, specify the position
to split the video using the Split (scissor-shaped) icon.
For split videos that are not required, select them and press [Del] key to
delete.
8. Click [Author].
This switches to the Authoring screen.
9. Click the [Author Preview] button.
10. Confirm the operation on the Preview screen.
This switches to the screen where the created DVD menu can be
checked. Use the remote control on the right of the screen to confirm
the operation.
To close this screen, click the top right button (in the shape of a power
supply button).
11. Set the DVD in the optical media drive.
12. Click [Make Movie].
13. Select [Burn to Disc] check box on the output destination setting screen
and click the [Right arrow] button.
14. The configured output device appears. Check the settings and click the
[Right arrow] button.