Toshiba Qosmio F20 (PQF22) - Manual (Page 194)

9-2 User’s Manual
Optional Devices
PC card
The computer is equipped with a PC card slot that can accommodate
one 5 mm Type II card. Any PC card that meets industry standards
(manufactured by TOSHIBA or other vendor) can be installed. The slot
supports 16-bit PC cards, including PC card 16’s multifunction card and
CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides
superior performance for the greater demands of multimedia data
transmission.
Inserting a PC card
The Windows hot-install feature lets you insert PC cards while the
computer’s power is on.
To insert a PC card, follow the steps below:
1. Insert a PC card in the PC card slot.
2. Press gently to ensure a firm connection.
Inserting the PC card
3. After inserting the card, refer to the PC card’s documentation and check
the configuration in Windows to make sure it is appropriate for your PC
card.
PC cards can sometimes become hot during PC operation. Before you
remove a PC card always wait for it to cool. You could get burned
removing a hot PC card.
Do not insert a PC card while the computer is in standby or hibernation
mode. Some cards might not work properly.
PC card
PC card slot