Toshiba Qosmio F20 (PQF22) - Manual (Page 149)

User’s Manual 8-15
Using the Remote Controller, Front operation button and QosmioPlayer
15. Select [DVD (1 hour)] or [DVD (2 hours)] for the Format (Quality)
selection.
16. Click the [Start] button.
Burning of video to the DVD begins.
17. The disc tray of the drive automatically opens once writing is complete.
Click the [OK] button.
18. Open the files saved in step 6 and delete video files that will not be
written to the DVD.
19. Perform steps 8-17.
Importing videos and saving them directly on DVD
1. Check that the external device is connected to the computer.
2. Activate WinDVD Creator 2 Platinum.
[Start] -> [All Programs] -> [InterVideo WinDVD Creator] ->
Click [InterVideo WinDVD Creator] to activate.
3. Click the [Capture video directly to DVD disc] button.
4. Click the [Capture] button.
The video appears.
5. Click the [Property] button and select the [Video source] in [Device
control] tab.
6. Click the [Record] button at the start position of the scene to be
recorded (to be imported).
7. Click the [Stop] button at the final position of the scene to be stopped.
A message appears. After a while, the video appears in disc view.
This indicates that the video has been recorded directly to the DVD.
Importing videos taken with a digital video camera to a
computer, importing video data to a computer and saving
them on separate DVDs
1. Check that the external device is connected to the computer.
2. Activate WinDVD Creator 2 Platinum.
[Start] -> [All Programs] -> [InterVideo WinDVD Creator] ->
Click [InterVideo WinDVD Creator] to activate.
3. Click the [Create CD/DVD with existing video file] button.
4. Use the following steps to select the video file to be used.
(1) Specify the location to save the file.
(2) Select the file.
To select multiple files, hold down [Ctrl] key and click on the desired
files.
5. Click the [open] button.
Video files are imported and the Storyboard appears.
6. Use the following method to split video files into suitable sizes for
saving to DVDs and save them temporarily in a file. While playing back
the video files in the Storyboard, specify the position to split the video
using the Split (scissor-shaped) icon.
For split videos that are not required, select them and press [Del] key to
delete.