Toshiba Qosmio F20 (PQF22) - Manual (Page 226)

10-10 User’s Manual
Troubleshooting
USB floppy disk drive
The USB floppy disk drive is available only as an option.
For more information, refer to Chapter 4,
Operating Basics .
PC card
Refer also to Chapter 9, Optional Devices .
Some CD/DVDs run
correctly, but others do
not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the CD/DVD’s documentation.
Check the type of CD/DVD you are using.
The drive supports:
DVD-ROM: DVD-ROM,
DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD TM
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CD-EXTRA), Addressing
Method 2
Check the region code on the DVD. It must
match that on the DVD Super Multi drive.
Region codes are listed in the Optical media
drive section in Chapter 2, The Grand Tour.
Problem Procedure
Drive does not operate There may be a faulty cable connection. Check
the connection to the computer and to the drive.
You cannot access the
external USB floppy
disk drive
Try another floppy disk. If you can access the
floppy disk, the original floppy disk (not the drive)
is probably causing the problem.
If problems persist, contact your dealer.
Problem Procedure
PC card error occurs Reseat the PC card to make sure it is firmly
connected.
Make sure the connection between the external
device and the PC card is firm.
Check the PC card’s documentation.
If problems persist, contact your dealer.