Nokia N90 - Manual (Page 105)

Tools
96
Select Options > Advanced settings to change the
following settings:
Network type —Select the Internet protocol type to use:
IPv4 settings or IPv6 settings . The other settings depend
on the selected network type.
Phone IP address (for IPv4)—Enter the IP address of
your phone.
Name servers —In Primary name server: , enter the IP address
of the primary DNS server. In Second. name server: , enter
the IP address of the secondary DNS server. Contact your
Internet service provider to obtain these addresses.
Glossary: The domain name service (DNS) is an Internet
service that translates domain names such as
www.nokia.com into IP addresses like 192.100.124.195.
Proxy serv. address —Define the address for the proxy server.
Proxy port number —Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn. —If you select When available and you
are in a network that supports packet data, the phone
registers to the packet data network. Also, starting an
active packet data connection is quicker (for example, to
send and receive e-mail). If you select
When needed , the
phone uses a packet data connection only if you start an
application or action that needs it. If there is no packet
data coverage and you select
When available , the phone
periodically tries to establish a packet data connection.
Access point —The access point name is needed to use your
phone as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your phone, view or delete them
in
Configurations .
Date and time
See “Clock settings‚" p. 10.
See also the language settings in “General‚" p. 92.
Security
Phone and SIM
PIN code request —When active, the code is requested
each time the phone is switched on. Deactivating the
personal identification number (PIN) code request may not