Video calls, And “video, Calls‚" p. 18 – Nokia N90 User Manual

Page 27: Mak e calls

Advertising
background image

Mak

e calls

18

2 A short tone is played, and

Speak now

is displayed. Say

clearly the name or nickname that is saved on the
contact card.

3 The device plays a synthesized voice tag for the recognized

contact in the selected device language, and displays
the name and number. After a timeout of 1.5 seconds,
the device dials the number.

If the recognized contact was not correct, select

Next

to view a list of other matches, or

Quit

to

cancel voice dialing.

If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise the
device selects the first available number of the following:

Mobile

,

Mobile (home)

,

Mobile (work)

,

Telephone

,

Tel.

(home)

, and

Tel. (work)

.

Video calls

When you make a video call, you can see a real-time,
two-way video between you and the recipient of the call. The
live video image, or the selected still image captured by the
camera in your device is shown to the video call recipient.

To be able to make a video call, you must have a USIM card
and be in the coverage of a UMTS network. For availability
of and subscription to video call services, contact your
network operator or service provider. A video call can only

be made between two parties. The video call can be made
to a compatible mobile phone or an ISDN client. Video calls
cannot be made while there is another voice, video, or data
call active.

Warning! You cannot make emergency calls in the
Imaging mode because the keypad is not active. To
make an emergency call, activate the Fold open mode.

Icons:

You are not receiving video (the recipient is not

sending video or the network is not transmitting it).

You have denied video sending from your device.

To send a still image instead, see “Call settings‚" p. 93.

1 To start a video call,

in the Fold open mode,
enter the phone number
in the standby mode, or
select

Contacts

, and

select a contact.

2 Select

Options

>

Call

>

Video call

.

3 Activate the Imaging mode

after the call recipient has
answered the call.

Advertising