Nokia N90 - Manual (Page 32)

Mak
e calls
23
To replace the grey screen with a still image, see “Call
settings”,
Image in video call , p. 93.
Tip! To send video of yourself, in the Imaging mode
turn the camera unit so that the lens is facing you.
If you activate the Fold open mode during a video call, sending
your own video image stops because the camera is not active.
You can, however, still see the video of the recipient.
Note: Even if you have denied video sending during
a video call, the call will still be charged as a video
call. Check the pricing with your network operator
or service provider.
To end the video call, in the Imaging mode or in the Fold
open mode, press
.
Call waiting
You can answer a call while you have another call in
progress if you have activated
Call waiting in Tools >
Settings > Call > Call waiting .
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap . Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press
. To end both
calls, select Options > End all calls .
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select
Options during a call for some
of the following options: Mute or Unmute , Answer , Decline ,
Swap , Hold or Unhold , Activate handset , Activate loudsp. ,
or Activate handsfree (if a compatible headset with
Bluetooth connectivity is attached), End active call or End
all calls , New call , Conference , and Transfer . Select from
the following:
Replace —To end an active call and replace it by answering
the waiting call.
Send MMS (in UMTS networks only)—To send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press
to send the file to a
compatible device ( ).
Send touch tones —To send touch tone strings, for example,
a password. Enter the touch string or search for it in Contacts .
To enter a wait character (w) or a pause character (p), press
repeatedly. Select OK to send the tone.
Tip! You can add touch tones to the Phone number
or Touch tones fields in a contact card.