Nokia N90 - Manual (Page 41)

Conta
cts
32
To restrict calls from your phone to selected phone numbers,
select
Options > Activ. fixed dialing . To add new numbers
to the fixed dialling list, select Options > New SIM contact .
You need the PIN2 code for these functions.
When you use Fixed dialing , packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message centre
number and the recipient’s phone number must be included
on the fixed dialling list.
When fixed dialing is activated, calls may be possible to the
official emergency number programmed into your device.
Add ringing tones for contacts
When a contact or group member calls you, the phone
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your phone recognizes it).
1 Press to open a contact card, or go to the groups
list, and select a contact group.
2 Select Options > Ringing tone . A list of ringing
tones opens.
3 Select the ringing tone you wish to use for the
individual contact or the selected group.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
Options in the groups list view are Open , New
group , Delete , Rename , Ringing tone , Memory
details , Settings , Help , and Exit .
1 In Contacts , press to open the groups list.
2 Select Options > New group .
3 Write a name for the group or use the default name
Group %N , and select OK .
4 Open the group, and select Options > Add members .
5 Scroll to a contact, and press to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
To rename a group, select Options > Rename , enter the
new name, and select OK .
Remove members from a group
1 In the groups list, open the group you want to modify.
2 Scroll to the contact, and select Options > Remove
from group .
3 Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select
Options > Belongs
to groups .