Sharp SJ-FS820VSL - Manual (Page 9)

9
Energy Saving
Use this feature when you want to switch the appliance to
energy-saving operation.
To start operation
1 Select “Energy saving” icon.
(The icon is green.)
2
Select “ON”.
3
Finalize the setting.
Additionally the handle indicator (Green) will blink
3 times.
Handle indicator in operation
Every time you close the door, the indicator will fl ash (Green). •
If Plasmacluster is also in operation, the indicator will fl ash 6 •
times.
(Blue→Green→Blue→Green→Blue→Green)
To cancel operation
It is the same method as starting operation.
Select “OFF” in step 2.
NOTE
While this feature is operating, the inside temperature of the •
refrigerator and freezer compartment will be higher than the preset
temperature by about 1°C(refrigerator) and about 2°C(freezer).
This is the guide under the condition of the preset temperature
3°C(refrigerator) and -18°C(freezer). The display of preset
temperature will not be changed.
The effi ciency of power saving depends on the usage environment •
(controlling temperature, ambient temperature, frequency of
opening or closing the door, amount of food).
Cancel this feature when you feel the beverages are not cooled •
enough or ice making takes time.
Tips for saving energy
Keep the ventilation space as much as possible around ■
the refrigerator.
Keep your refrigerator out of direct sunlight, and do not
■
place next to heat generating appliance.
Open your refrigerator door as briefl y as possible.
■
Hot foods should be cooled before storing. ■
Place the food evenly on the shelves to allow the cooling ■
air to circulate effi ciently.
The amount of power consumption of this model is
measured according to the international standard
of the refrigerator performance under the following
conditions.
All accessories in the freezer •
compartment are taken out as
indicated on the fi gure.
Space dimensions. •
300mm
90mm
300mm
60mm
Flashing
(B423)W_1.indb 9 (B423)W_1.indb 9 2013/04/18 18:24:25 2013/04/18 18:24:25