BodyCraft BCG-GX - Manual (Page 8)

7
STEP 2 ASSEMBLE TOP FRAME
1. Insert Guide Rod Mount (129) onto the
Guide Rods (5), then attach to Top Frame
(2) using two 5/16" X 5/8" Botton Head
Bolts (108). Tighten 5/16" X 1/4" Set
Screws (112) into the Guide Rods (5).
Place Top Frame (2) on top, making sure to
insert the Guide Rods (5) and Rear Upright
(4).
2. Attach Top Frame (2) to Rear Upright (4),
using three 3/8" X 3/4" Hex Screws (109)
and three 3/8" Washers (116).
3. Attach the Top Frame (2) to the Front
Upright (3) using two 3/8" X 3-1/8" Hex
Bolts (98), four 3/8" Washers (116), and two
3/8" Nylon Nuts (124).
4. Attach Lat Bar Holder (22) to Top Frame
(2), using two 5/16" X 1/2" Round Bolts
(104) and two 5/16" Washers (117).
5. Install the plastic end caps as shown.
Insert three 50mm SQ. End Caps (67) to
each end of the Top Frame (2).