Bernina Happy Voyager - Manual (Page 3)

Happy Voyager
Main Catagories Index Bernina Manual HV Manual
Contol Panel Interface Control 01 3-8,3-9 & 3-B
Drive Mode 02 3-A
Menu Mode 03 none
Happy and Bernina
Embroidery SoftwareV5
Metric Dimension Settings 04 none
Creating Hoops for the HV 05 none
Embrodiery Pattern
Management
Transferring Patterns using Happy Link 06 5-4
Transferring Patterns using a Memory Card 07 5-5,5-6 & 5-7
Transferring Patterns from the Machine to a Card 08 none
Locking Pattern 09 11-1
Deleting Pattern 10 5D, 5C & 5E
Most Common Tasks Selecting a Design 11 5-A
Programming Thread Colors for the Needles 12 13-3 & 13-4
Programming Thread Colors for the Design 13 13-5 & 13-6
Positioning the Design in the Hoop/Creating Hoops 14 20-2 & 20-3
Using the Trace Function 15 6-4
Forward and Backward Tracking. 16 3-8 & 3-9
Design Mulipulations Scaling the Size of the Pattern 17 12-2
Rotating/Mirroring Design 18 9-5
Adjusting the Satin Stitch Width and Pull
Compensation
19 12-3
Removing Unwanted Jump Stitches 20 19-1 to 19-9 & 19-A
Embroidering Multiple Designs 21 12-5 & 12-6
Adding
Devices/Accessories
Installing the Cap Device/Machine Set Up 22
7-1 to 7.9 & 7A, B & C,
20-4 to 20-6
Installing the Hoop Tech Device/Machine Set Up 23 none
Additional Machine
Settings
Reversing Directions of Frame Movements 24 5-1
Single Needle Color Transfer 25 13-2
Pattern Color Transfer 26 13-5 & 13-6
Start Embroidering from a Particular Stitch 27 9-6
Start Embroidering from a Particular Color 28 9-7
Service Tasks Machine Maintenance, Cleaning/Lubrication 29 23-1 & 23-2
Thread Cutting Length 30 5-1
Machine Firmware Version 31 22-3
System Reset 32 25-1
Speed Reset 33 25-2