Bernina Happy Voyager - Manual (Page 58)

Happy Voyager
Installing the Hoop Tech Device/Machine Set Up 23
Description of function
Interchangeable Tubular Clamping System (ITCS)
The clamping capability of the ITCS allows embroi-
dering with many, otherwise "un-hoop-able or difficult
to hoop" items, such as suit cases, leather etc. The
ITCS are available in a large (ITCS2) or small
(ITCS1) chassis size, each with an assortment of
window sizes that are quickly and easily exchange-
able without the use of tools.
Warning: Extra precaution must me taken when us-
ing this device:
• Never turn on the machine with the Interchange-
able Tubular Clamping System installed.
• Only install the ITCS after the machine has cali-
brated its X & Y position.
• Do not performing power fail recovery with
ITCS installed.
• Only move the X & Y position or TRACE with
the Clamping System closed
• Just in case, be prepared to hit the red panic
button during the TRACE and any X & Y OFF-
SET executions.
The ITCS is a effective device to efficiently embroi-
der - bags - CD cases - jackets - leather - canvas -
quilted goods - computer bags - back of caps, etc.
Basic clamping system requires 3 items:
1. Interchangeable Tubular Clamping System
(Either ITCS 1 small or ITCS 2 Larger )
2. Set of Tubular arms (Brackets)
Arm ITCS 2 , model 1201
3. Window insert to fit the clamping system and
most appropriate for the embroidery task.
Note: Additional window insert for each
Tubular Clamping System are available.