Bernina Happy Voyager - Manual (Page 32)

Happy Voyager
Programming Thread Colors for the Designs 13
Explanation: The first set of numbers are the color
sequences in the pattern. The second set of num-
bers are the needles (thread colors) allocated for
that color sequence.
Use the up/down arrow keys to move among the
color sequences.
Use the right/left arrow keys to change the needle
(color)
Note: Scroll down past the 5 colors for additional
allocations.
Note: Needle number 0 means no needle has
been chosen. The machine will stop waiting for a
selection.
When selecting SET a
*
will appear next to the
needle number. This is a COLOR STOP after fin-
ishing this color the machine stops.
Remove the color stop pressing SET again.
If a diamond is next to the needle number, that
means that a FRAME out has been applied to
that color sequence. After sewing out that color
the machine will stop and the frame will move to a
determined position. See Happy Voyager user/
operator manual.
Select ESC to exit.