Bernina Happy Voyager - Manual (Page 4)

Happy Voyager
Interface Control 01
Description of function
Identifying and explaining the functions of the
keys/buttons on the control box.
ARROR Keys (Up, Down, Left, Right):
• In the DRIVE mode move the hoop.
• In the MENU mode used to navigate to de-
sired item.
SET button: Select and execute a function.
MENU button: Enter the menu mode. (also enter
into submenu’s).
ESC button: Stop or cancel a selected setting.
(Used to escape out of a menu or function.)
FF button (Fast Forward): In conjunction with
the arrow keys increases frame movement speed
for faster tracking.
+/-
buttons: Plus/minus buttons increases and
decreases the machine embroidery speed.
ARROR button (Left/Right): Moves the sewing
head in the desired direction. (Moves between
needles 1 - 12.)
P FOOT button: Raises and lowers the presser
foot. (Useful in positioning the needle at a precise
point in the design. i.e. after a thread break)
Process: Lower the presser foot, then manually
pull down the needle. Perform a CUT to return to
normal embroidery position.)
TRACE button: Verify that the pattern selected
embroiders within the boundaries of the hoop.
(See: “Using the TRACE function”.)