Beyonwiz FV-L1 - Manual (Page 28)

Quick Setup
21
1-2. Basic Operation
1) Enter and Exit Setup Mode
You can enter the setup mode by pressing the SET-UP button on the
remote control. To return to the previous operation mode (e.g.
STB/PVR or File Playback), press the EXIT button.
2) Setup Menu Structure
The setup menu is grouped into four main categories (represented by
icons across the top of the screen): Configuration (“Config.”), Network,
Miscellaneous (“Misc.”) and System. Firstly, choose one of these main
categories using the LEFT/RIGHT buttons. As you select a main
category, a list of sub-categories will be displayed on the left side of the
screen. When you choose a sub-category with the UP/DOWN buttons,
the items belonging to the sub-category will be listed in the item list.
Press the OK button to enter the item list, and use the UP/DOWN
buttons to select an item in the item list. To access the configuration
options for an item, press the OK button. To exit from the item list
press the EXIT button.

LEFT/RIGHT buttons: Select a main category
 UP/DOWN buttons: Select a sub-category
 OK button: Enter the item list (UP/DOWN to select an item, OK to
access the item’s configuration options).

EXIT button: Exit from the item list.
NOTE
 While in the item list, the LEFT/RIGHT buttons can still be used to
navigate through the top menu.

This chapter explains only the Configuration and Network categories
of the setup menu. The remaining categories Miscellaneous and
System will be explained in Chapter 9 “Advanced Setup”.