Beyonwiz FV-L1 - Manual (Page 58)

STB & PVR Function
51
2) Add New Timer
To set a new timer, press POP-UP then OK to display the timer list.
Then press the RED button to display the “Add Timer” window, as
shown below.
You can configure the following items;

Service: Select the service you wish to record. The default setting is
the service that you are currently viewing. To change it, press OK to
display the service list. Use the UP/DOWN buttons to select your
desired service, and then press OK. To record a radio service, press
the TV/RADIO button to change to the radio service list.

Date: Set the start date of the recording. Move the cursor with the
LEFT/RIGHT buttons and change the date with the CH+/CH-
buttons or by using the NUMERIC buttons

Start Time: Set the start time of the recording. Move the cursor with
the LEFT/RIGHT buttons and change the time with the CH+/CH-
buttons or by using the NUMERIC buttons.
 Duration: Set the recording duration. The default recording duration
is 70 minutes. You can reduce or extend the duration of the
recording with the LEFT and RIGHT buttons respectively.
NOTE
 After changing the date, start time or duration, pressing the OK
button or moving to the next line will update the file name and end
time when applicable.