Beyonwiz FV-L1 - Manual (Page 70)

STB & PVR Function
63
3) Set timer
To set a timer for a future program, perform the appropriate procedure
as follows;

For EPG Action = “Change Svc”, place the cursor on your desired
program and use the following functions;
 To set a recording timer: Press the REC button. The program will
now be shaded red.
 To set a viewing timer: Press the PLAY button. The program will
now be shaded blue.

To delete an existing timer: Press the STOP button. The program
will now return to the normal grey shading.
 For EPG Action = “Set Timer”, place the cursor on your desired
program. Press OK to set a recording timer. The program will now
be shaded red. A second press of the OK button will set a viewing
timer, and the program will now be shaded blue. A third press of the
OK button will delete the timer and return the program to the normal
grey shading.
NOTE

When EPG Action = “Set Timer”, the REC, PLAY and STOP buttons
can still be used to set and delete timers.
 Timers set via the EPG are created with a recurrence setting of “Once”.
You must edit the timer if you wish to change the recurrence e.g. for a
weekly timer.
4) Edit timer
To edit an existing timer, place your cursor on your desired timer and
perform the appropriate procedure as follows;

To edit a recording timer, press the REC button.
 To edit a view timer, press the PLAY button.
This will open the “Edit Timer” window. You can now make your
desired changes to the timer (see “Edit Timer” section earlier in this
chapter).
NOTE

You can create and edit a timer quickly by pressing the REC button
twice for a recording timer or the PLAY button twice for a view timer.
 If a program is only partially covered by a timer, it is shaded in pink
for a recording timer or pale blue for a view timer.