Beyonwiz FV-L1 - Manual (Page 32)

Quick Setup
25
2-2. A/V Output Setting
You need to set the video and audio configurations to suit your TV and
audio equipment. Make sure the video and audio connections on the
FV-L1 are correctly connected to your TV and audio equipment (see the
“A/V Connection” section in Chapter 3).
The A/V Output menu consists of two parts; video output and audio
output.
1) Video Outputs

Video Type: Select either PAL or NTSC format. PAL is the standard
format in Australia.

Video Output: Select the connection type used to connect your FV-L1
to your TV set in the “Video Connection” section in Chapter 3.
 Resolution: If you select HDMI or Component for video output, set the
resolution to suit the resolution of your TV screen.

TV Aspect Ratio: select either 4:3 or 16:9 to suit the aspect ratio of
your TV screen.
NOTE
 Component video output supports SD (576i for PAL and 480i for
NTSC), 480p, 576p, and HD 720p and 1080i.

If you set the video output resolution to HD (i.e. more than 576p),
the composite and S-Video outputs will be disabled automatically.
 If you set the video output resolution higher than the maximum
resolution that your TV set can accept, your TV will not display a
picture (refer to your TV’s user manual).

If you set the HDMI output as Auto, the FV-L1 configures the best
format of HDMI suitable for your TV set automatically. Some TV sets
do not support the auto-configuration function. In this case, you
must set the resolution manually.
 HDMI outputs audio in digital format as well.