Beyonwiz FV-L1 - Manual (Page 36)

Quick Setup
29
2-4. LiDiC (Line-in Digital Converter – available separately)
The LiDiC can receive either Composite or S-VIDEO signals from one or
two external A/V devices simultaneously, and pass these signals
through to the FV-L1. You need to configure the LiDiC to suit the
connected external A/V device(s) as follows;
 LiDiC: You can enable or disable the LiDiC. When the LiDiC is
enabled, new services named “950 LiDiC 1” and “951 LiDiC 2” will
appear in the service list. You can watch and enable the PVR
functions for external A/V signals by selecting the 950 or 951 service.

Display: Select either of the following options;
 Full: Displays incoming video signal as 16:9 aspect ratio.
 Centre: Displays incoming video signal as 4:3 aspect ratio.

Input 1: Select either Composite or S-VIDEO to suit the connection of
the external A/V device connected to Input 1 of the LiDiC.
 Video Type 1: Select either PAL or NTSC to suit the video output of
the external A/V device connected to Input 1 of the LiDiC.
 Input 2: Select either Composite or S-VIDEO to suit the connection of
the external A/V device connected to Input 2 of the LiDiC.

Video Type 2: Select either PAL or NTSC to suit the video output of
the external A/V device connected to Input 2 of the LiDiC.
NOTE

Refer to the LiDiC user manual for more information about connecting
external A/V devices to the FV-L1.