Beyonwiz FV-L1 - Manual (Page 55)

STB & PVR Function
48
3-2. Instant Recording
To record the current service and store it on the HDD instantly, press
the REC button. A recording will start, and a “Recording” window will
appear with various options to configure your recording.
Use the UP/DOWN buttons to select each recording option you wish to
change. The recording options are as follows;

Duration: Set the recording duration. The default recording duration
is 70 minutes. You can reduce or extend the duration of the
recording with the LEFT and RIGHT buttons respectively.

Starting Point: Select the starting point of the recording. Use the
LEFT/RIGHT buttons to select one of the following options;
 Live: Record from the current position (default setting).

Current Program: Record only the current program, even if there
is a previous program stored in the time-shift buffer.

All: Record all programs in the time-shift buffer.
 File Lock: You can lock the recording file to prevent unauthorised
access and deletion. Your 4-digit PIN access code will be required to
play or delete a locked file (see “Set PIN Number” section in Chapter
9). The default setting is “Unlock”. Use the LEFT/ RIGHT buttons
to select “Lock”.
 File Name: Set the file name of the recording. The default recording
file name is the name of the program 40 minutes from the current
time, as provided by the service broadcaster or your service provider.
To change the file name, press OK to display the “Keyboard Input”
pop-up window and enter your desired name (see “On-screen
Keyboard” section in Chapter 4).
After setting all recording options, use the UP/DOWN buttons to select
“Accept” and press OK, or press the REC button again. If you wish to
cancel the recording, select “Cancel” and press OK, or press EXIT.